LED Constant Voltage Drivers – Keep This In Mind..

Among the issues of LED lights dimmability is one of the latest challenges still yet to be fully solved. Dimming LEDs is theoretically easy, because analogue dimming, that is the adjustment of current, has long been a choice. However, this process only works safely when combined with one LED bulb. Systems of LEDs require a modern-day way of dimming. The 2 basic types of dimming are the PWM or Pulse-Width-Modulation and the analogue dimming, each of which are switched-mode regulators. These two types are similar within the sense that they both control the time-averaged current through the diode.

Analogue dimming is a very simple way of dimming, it will be the adjustment of cycle-by-cycle of the LED Power Supply current regulated using a potentiometer. The current is adjusted for the LED increasing and decreasing its intensity.

The drawback to analogue dimming is it only works safe as long as we dim a single light bulb. Systems of LED lights demand a more refined technique. The issue of dimming a process of LED lights is that we now have various types of LEDs, requiring different methods for dimming. If there is a process of lights we may like to dim, the different LEDs may react diversely for the equivalent amount of current, and as the current is reduced some LEDs can switch off later or sooner than others. Also, analogue dimming largely changes the color from the light, similarly to after it is used in combination with incandescent lights.

Probably the most commonly used manner of dimming LEDs is Pulse-Width Modulation, which can be fundamentally the cutting from the phase in a certain frequency. PWM switches the devices between fully on and fully off in a frequency that should not be told from the eye, therefore LEDA Driver 12v always run on the forward current recommended. The frequency of switching determines the brightness of light, therefore the longer the lights are “on” the brighter the light is going to be. This is the same technique utilized in incandescent light dimmers as well, other than incandescent lights react to current more slowly, and for that reason demand a different frequency.

Two types of Pulse-With Modulation signals are used often with dimming light: the leading-edge and also the trailing edge techniques. Both of these are not the same methods for cutting the phase, and result in separate dimming technologies. The most frequently used dimmers of LEDs use solely the leading-edge technology. Dimmers marked as R or RL are compatible with most dimmable LEDs, since they work with the leading edge technology and you should not include electronic transformers. TRIAC drivers, or devices governed through the DMX and digital addressable lighting interface (DALI) protocols and, later on, may include wireless (RF) as a control option, which is dimmers that turn or slide with a knob, all work with dimmable LEDs.

Alas leading edge technologies controlled having a touch or push button, are often powered by an electric powered transformer, excluding many dimmable LEDs.

One other kind of phase-cutting technique is trailing edge technique, usually used in MOSFET or possibly is not suitable for almost all dimmable LEDs. Among the latest inventions appearing on the industry is the RAIS lamp technology. RAIS lamps provide a higher degree of functionality and seem to work with all kinds of dimmers available on the market. However RAIS technology remains new, as well as its long-term effect on LEDs have not been fully tested. When they turn out to be trustworthy their application both domestically and commercially, can dwxakg out to be considerably safer and much easier than previous dimmable LED lights’.

Within the ever-evolving technologies of Leds, dimmable LEDs are still to be created to further compatibility and much better performance. As there is no general rule for the purpose dimmer LED Waterproof Power Supply might be appropriate for, always check the technical details using the distributor. Use of Leds with non-compatible dimmers might ruin the LEDs, and they are, right now, not the most affordable solution of lighting.