Pipeline and pipe inspection is a crucial service offered to many industries, often oil, gas, chemical and power. The main function of SMC manufacturer inspection is usually to maintain and increase the integrity in the plant or system, in order to avoid failures, ensure safety standards, avoid accidents, adhere to government laws and save time and money.
Pipeline and pipe Inspection uses NDT (Non Destructive Testing) methods to undertake inspections, using very skilled personal often performing various strategies to determine variety of flaws, size, type and likelihood of each. Outcomes are summarised in a report with appropriate graphs and technical drawings to illustrate the a summary from the results after careful analysis from a trained technician.
Several different types of piping could be inspected, some of the main types include;
Above ground non insulated piping
Long pipeline runs
Short underground runs
Service Water systems in nuclear plants
Fire protection systems in nuclear plants
The Reduced Frequency Electromagnetic Technique (LFET) is often used because of its highly flexible nature. For rapid identification of total flaws, a sheet of kit including the PS-2000 may be used, though it is also dedicated to screening mode to provide more in depth information, which could then be proved up via another technique such as A-Scan Ultrasonics.
For longer pipelines equipment for example the LineCat excels. The LineCat is ideally designed for long pipeline inspection, because of its shape, and its self-propulsion. The LineCat is a rig that wraps across the OD (Outer Diameter) of the pipeline, propelling itself at 10 ft/minute. The LineCat uses the LFET technique just like the PS-2000 above, however due to its rapid independent nature, makes SMC industrial pipeline hassle free, compared to a other systems which require manual movement via an operator.
In nuclear plants the key concerns of piping inspections are service water system piping and fire protection system piping. These are typically inspected to quantify MIC (Micro-biologically induced corrosion) and FAC (Flow accelerated corrosion).
For shorter underground piping runs, equipment such as the Eagle-2000 system might be utilised. The Eagle-2000 uses SMC alloy tube, and performs inspections 17dexypky the ID (Inner Diameter), getting on small flaws due to its high res and small sensor size. It can provide realtime 3d data to analyse flaws instantly, and inspects through scale.
During inspection exactly the same kinds of flaws often arise, attack by internal and external corrosion are standard, along with cracking, though 3rd party damage is one of the main culprit for a lot of the major flaws. Flaws caused throughout the manufacturing process can be found on also, though they’re generally rare into the future across.